Rubber Liners
PC-355
60 Durometer High Temperature Chlorosulfonated Polyethylene (Hypalon, CSM)– Specifically designed for high Chemical and Abrasion concerns at extreme temperatures.
ASTM & Test Requirements
| Hardness (ASTM D2240) | 50-60 Shore A (+/-5) |
| Tensile (ASTM D412) | 2,700 psi minimum |
| Elongation (ASTM D412) | 600% minimum |
| Tear (Die C) | 300 LB / Linear Inch |
| Service Temperature | -40ºF to 310ºF (154ºC) |
| Specific Gravity | 1.40 |
Overlay
Atmospheric Aging
| Moisture Resistance | Excellent |
| Permeability | Excellent |
| Compression Set | Good |
Resistance
| Sliding Abrasion | Excellent |
| Impingement Abrasion | Excellent |
| Acid (Concentrate) | Excellent |
| Acid (Dilute) | Excellent |
| Oil & Gasoline | Excellent |
Curing
| Atmospheric Cure | 24hrs @ 200°F | Pressure Cure 2hrs @ 250°F |
Adhesive System
| 1st Coat on Metal | Chemlok 205 |
| 2nd Coat on Metal | Chemlok 220 |
| 3rd Coat on Rubber | CR Tack |
| 4th Coat on Metal | CR Tack |